There hasn’t
been so much time to spend in the workshop the last days. But I have at least
managed to disassemble the knocker unit, re solder the cable, glued back the
loose wrapping paper, cleaning the coil sleeve and polished the plunger, it does
now give a nice knock. While working with the knocker I added a cable clip to
secure the two cables for the topper. Both to make sure they are not shorted in
to something by accident and to relieve the strain at the knocker cables since
they are tied in to the same cable loom. I have also prepared an external
battery holder with a bracket to secure the batteries, getting it in to the
game will be a job for another day.
Inga kommentarer:
Skicka en kommentar