Sega Baywatch

The Baywatch was ready and delivered quite a long time ago, I just haven’t had time to update the blog. The switch I ordered for the ball through solved the two problems of ejecting two balls and not detecting a drained ball. Besides that it was more or less just to tightening some loose nuts, adjusting the left in lane switch and cleaning and a polish of the playfield. I played the game for a long time and all worked fine, until I noticed that the upper right ball gate sometime didn’t open as it should. The cause turned out to be loose screws at the actuator arm. The only problem is that almost the whole playfield have to be disassembled to reach in to the gate, it took almost three hours disassembling, tightening the screws and assemble the lot again.