These
bumpers have taken some serious beating and will be rebuilt with new skirts and
bodies, the right one also need a new lamp socket. It’s quite common that the leads
break on these but repairing it with wires as it has been done here isn’t the
best solution.
This
bumper have been taken apart and then been reassembled the wrong way round, the
metal yoke should be at the other side of the fiber yoke, it did also miss the
rod washers. Another of the bumpers had a broken metal yoke, the three bumpers
really need an overhaul.
This is
another reason for taking out the playfield, the front left corner of the
cabinet has cracked. I think it’s just the leg and leg bracket that keeps it
together. One of the side rails are also lose and I need to remove of the back
box to reattach it. It will be easier to take care of the broken corner when the
cabinet is all naked so it will have to wait for a while.
This is a
bit odd. Someone has cut the cables to the coin switches and attached another
cable that goes through a small PCB which is then wired in to the driver board in
the top box. I haven’t got a clue of why this has been done, I will reconnect the
switches as they should be and get it to work the proper way.
Inga kommentarer:
Skicka en kommentar